Fluid Mixing Processes

Webinar: Crystallisation Modelling: Mixing, CFD and Population Balance

Webinar: Crystallisation Modelling: Mixing, CFD and Population Balance
  • Date From 23rd November 2022
  • Date To 23rd November 2022
  • Price Free of charge, open to all.
  • Location Online: 13:00 GMT. Duration: 1 hour.

Overview

The modelling of crystallisation and precipitation processes requires the coupling of fluid dynamics and population balance modelling. The former ‘sets the stage’ by determining the local mixing environment and supersaturation (the driving force of crystallisation) while the latter predicts the evolution of the crystal size distribution.

The webinar will discuss the fundamentals and the state of the art in modelling approaches, as well as show results from coupled computational fluid dynamics (CFD) - population balance simulations. The webinar is dedicated to the memory of the late Professor J Baldyga whose fundamental insights were pivotal for the development of this field.

Speaker

Dr Stelios Rigopoulos, Reader in Thermofluids, Imperial College London

Stelios holds an MEng in chemical engineering from Aristotle University of Thessaloniki, Greece, an MSc in Environmental Technology from UMIST and a PhD in Chemical Engineering from UCL.

After conducting postdoctoral research at Imperial College London, he joined the University of Manchester as Royal Society University Research Fellow, while in 2010 he joined again Imperial College London where he is currently Reader in Thermofluids. His research focuses on advanced theoretical and computational methods, including population balance modelling, computational fluid dynamics (CFD), stochastic and machine learning methods for modelling physical and engineering problems such as reacting flows, aerosols, crystallisation, nanoparticle synthesis and environmental flows.

The material presented in this webinar has not been peer-reviewed. Any opinions are the presenter's own and do not necessarily represent those of IChemE or the Fluid Mixing Processes Special Interest Group. The information is given in good faith but without any liability on the part of IChemE.

Time

13:00–14:00 GMT.

Software

The presentation will be delivered via GoToWebinar®. Check system requirements.

You are advised to join the webinar at least ten minutes before the scheduled start time, to allow for your computer to connect.

Webinar archive

This webinar is free of charge and open to all to attend, but if you wish to access the slides and a recording to replay on demand then you'll need to be a member of the Fluid Mixing Processes Special Interest Group.

Member-exclusive content

Become an IChemE member to enjoy full access to this content and a range of other membership benefits. If you are already a member, please log in.


Back to events